datasheet | january 2012 fiber optics | rev 2012.01 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. applications high performance supertrunking links high power distri bution networks redundanct ring architectures fttx networks. features full functionality 1 ru edfa low noise figure (typ < 5.5 db) total input power range: -10 dbm to +12 dbm +14 dbm to +30 dbm output power optional internal optical power splitters standard rs-232 communications standard snmp communication (coming soon) key lock switch standard and optional gain flatness (1530 nm ? 1562 nm) vfd panel status indicator low electrical power consumption input/output isolation >40/40 db polarization dependant gain < 0.1 db polarization mode dispersion < 0.5 ps pona 2100 series erbium doped fiber amplifier the emcore pona 2100 series erbium doped fiber amplifier (edfa) is an ideal building block for oem system integrat ors. the family of pona 2100 series edfa?s is designed to meet the most demanding noise performance requirements of catv applications, and performs all the functions required of an optical amplifier for system integration. pona 2100 series edfa?s provide optical isolation on the input and output of the gain block for stable, low noise operation. the input and output optical signal power levels are detected for monitoring and control. the input optical signal is amplif ied with active gain control for a constant output power level, or with active output power control for constant gain mode. the pona 2100 series edfa?s also provide monitors and associated alarms for all vital characteristics. the optical ou tput of the pona 2100 series edfa?s can be split into multiple ports by an optional external splitter. general and mechanical specifications property requirement comments operating wavelength 1532 ~ 1565 nm 1545 ~ 1565 nm pona 2114 ? pona2127 pona 2130 operating case temperature -10 ? c to 55 ? c standard storage temperature -40 ? c to 85 ? c standard operating humidity 20% to 85% non-condensing voltage supply range 100 vac to 240 vac 50/60 hz -36 to ?60 v dc standard optional optical connectors sc/apc; sc/upc; fc/apc; fc/upc; e2000/apc user specified dimensions in inches 19.0?w x 14.76 ?d x 1.72?h 19? rack mounted, 1u pona 2100 series
datasheet | january 2012 fiber optics | rev 2012.01 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. optical/electrical characteristics 1 property symbol (units) limit pona models comments 2114 2117 2120 2122 2124 2127 2130 operating input power pin (dbm) max +12 +12 +12 +12 +12 +12 +12 operating input power pin (dbm) min -10 -10 -10 -10 -10 -10 -10 typical (may vary for some models) 14.0 17.0 20.0 22.0 24.0 27.0 30.0 output power po (dbm) +/-.25 +/- .25 +/- .25 +/- .25 +/- .25 +/- .25 +/- .25 (note 2) noise figure nf (db) typ/ma x 4.5/5.0 4.5/5.0 4.5/5.0 4.5/5.0 5.0/5.5 5.0/5.5 5.5/6.0 (notes 3, 8) static gain flatness gf (db) max +/-0.5 +/-0.5 +/-0.5 +/-0.5 +/-0.5 +/-0.5 (note 7) (note 4) dynamic gain flatness (db) max +/-1 +/-1.25 +/-1.5 +/-2.0 +/-2.0 +/-2.0 (note 7) (notes 5, 8) output power stability (db) max +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 +/- 0.2 (note 6) power consumption (steady state regime) psys (w) max 5 7 9 12 20 35 40 50 o c case notes : 1. unless stated otherwise, all specif ications apply over the full operat ing temperature and humidity ranges 2. measurement variations 3. measured with 8 evenly spread input optical signals @ 25c, ? pin 0 dbm (measuring with 1 input optical signal with pin 0 dbm and ? 1550 nm is also possible. (low noise figure options with nf 4.0/4.5 db are available for some models) 4. measured with a swept probe signal (pp), where pp 0 dbm @ 25 ? c 5. measured with a swept probe signal (pp), and a fixed tone signal (pt) @ ~ 1550 nm; (pt pp+20 db; pt + pp 0 dbm) @ 25 ? c; gain flattened options with g +/-1.0db are available (for some models) 6. over polarization and temperature 7. static and dynamic gain flatness fo r pona 2130 can be defined for 1545 nm ? ? 1562 nm and by special request only. 8. specific nf and g can be guaranteed at a single specified input optical power level (pin = pt + pp) equal or different from 0 dbm. (please contact your sales repres entative for more information) pona 2100 series
datasheet | january 2012 fiber optics | rev 2012.01 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. outline drawing ac versions shown below with 8-port option dc versions shown below with 8-port option compliance information 89/336/eec electromagnetic compatibility directive, amended by 92/31/eec & 93/68/eec 73/23/eec low voltage dire ctive, amended by 93/68/eec en 50083-2, (2001) cable networks for tv signal s, sounds and interactive services, part 2 electromagnetic compatibility for equipment. en 55013 mains conducted emissions en 61000-3-2 mains freq uency and its harmonics, conducted emissions en 55020 radiation from active equipment, radiated immunity en 61000-4-6 immunity of active equipment, radiated immunity en 61000-4-3 immunity of active equipment, radiated immunity en 61000-4-2 electrostatic discharge immunity en 61000-4-4 electr ical fast transient / burst immunity en 60950 low voltage directives en 60825-1 laser safety requirement en 60825-2 laser safety requirement cdrh laser safety requirement fit rate: 90% level of confidence < 1700 @ 30 ? c (pona 2130) pona 2100 series
datasheet | january 2012 fiber optics | rev 2012.01 information contained herein is deemed reliable and accurate as of the issue date. emcore reserves the right to change the desi gn or specification at any time without notice. ordering information pona 21 - - - - * notes: 1. for ordering pona preamplifiers please contact your sales representative 2. only some models can be order with gain flatt ened and/or low nf options. (-01, -02, and ?03 suffixes). please contact your emcore sales representative for details laser safety information this product meets the applicable requirements of 21 cfr 1010 & 1040 and is classified as a class iv laser product based on the maximum optical output power shown below. during use as intended, the laser energy is fully contained within the fiber network such that there is no accessible laser radiati on and would meet the requirements for a class i laser product. the laser product report has been submitted to the cdrh and the accession number is expected by october 2006. wavelength = 1530 ~ 1561 nm (dependant on input source) maximum output power = 1.0 w (single output, 30 dbm model) optical output power output ports input voltage connector gff/ nf options 14 - 14 dbm 1 ac ? 90-260v 50/60 hz sc ? sc/apc (default option) 00 - standard 17 - 17 dbm 2 dc ? 48 v fc - fc/apc (default option) 01 ? gain flattened option 20 - 20 dbm 4 2dc ? redundant 48 v ec - e2000/apc 02 - low nf option tc - sc/upc 22 - 22 dbm 8 gc - fc/upc 03 ? gain flattened and low nf option 24 - 24 dbm 16 27 - 27 dbm 30 - 30 dbm pona 2100 series
|
